Copyright, All Rights Reserved.

Copyright, All Rights Reserved. All content on this site is copyrighted, Dana Worley, as of the date of posting. Reuse or redistribution of this content is strictly prohibited without express written permission of the author.

Wednesday, May 28, 2014

GAGU Casting at Spectrum Studios, Salt Lake City

Detail of my finished piece
As I've mentioned before, one of the benefits of membership in the Glass Art Guild of Utah is the opportunity for the guild to bring in instructors for group classes. Not only are we able to attract some of the best teachers in fused glass, but we also have a wealth of knowledge under our own roof.

Last week I had the chance to take a two-day, open-face casting class led by GAGU member Jack Bowman, assisted by Stephen Teuscher (also with GAGU) and "guest lecturer", Ann Cascarano. The open-face casting process uses clay to create a form over which plaster is poured. Once the plaster is dry, the mold is hardened in the kiln and then filled with glass and fired. 

I thought I would provide a few pictures of the process. Unfortunately, the only piece I have finished pictures of is my own piece (I couldn't make it to the final "unmolding"), but hopefully, you'll find the process interesting and informative, nonetheless.

We started with an 8"x14" slab of clay, that was roughly 3/4" thick. We could add to or take away whatever we liked, as long as we stayed within a few size guidelines so they all fit into the kiln. Following are a few of the initial clay pieces. The first one is mine, with pre-fired fused glass "fishes" I had made out of iridescent glass. 












Andie and Connie, working on their pieces
After the clay was prepared, it was time to encase the molds in plaster. As one person poured the plaster, another gently agitated the mix to keep bubbles from forming on the surface of the clay and to make sure the plaster was evenly distributed. 

Laying out the frame
Pouring the plaster

When the plaster was dry, we removed the clay (with the help of a few forks and knives to get it started, and then clay tools to finish digging out the fine details). The pieces were then taken to the wash station for a good rinse.
Amber, trying not to get too wild with the water!
Here are a few of the pieces cleaned, and ready to be dried in the kiln overnight.





















Back the next day, and ready to fill the molds with glass. But before we can start, Jack shows us how we will unmold our piece once it is complete. 

The plaster breaks away quite easily.
The filling begins!
Filling (frit for the rocks)

Filling (more frit for rocks and river bed)

Filling (larger frit and glass)

Filled! (and ready for the kiln)
Here are some of the other pieces filled and ready to fire -- We're a creative bunch!



Little by little, the kiln was loaded with our pieces.

All in and ready to fire!
Steve, loading the kiln










Because of other commitments I wasn't able to join the rest of the group for the unmolding a few days later. I'm sorry I missed it -- all of the pieces were unique and I'm sure beautiful. Here's the result of my finished piece, however.

I'm very happy with the results. The rocks look like rocks and my "fish" sparkle. The rocks were a mixture of coarse brown frit, some medium terracotta, black fine, gray powder, and green fine. I knew I would end up either with great looking rocks or a muddy mess, but I wasn't certain which. Thankfully, I ended up with good results!

It was a pleasure learning from Jack, with the help of Steve, and also meeting and working with Ann. Ann is a warm person and fantastic artist. She created this wonderful piece while at Spectrum Studio.

Ann Cascarano, with her glass doors



If you are interested in learning more about open-face casting, you can always contact Jack at Spectrum Studio about his next class! If you can't make it to Salt Lake, there are also some great resources on the web:

Gerry Newcomb Casting Tutorial

Bullseye Education Video (subscription required -- their tutorials are well-worth the $39/yr)

Uroboros Kiln Casting PDF

Glass Art Magazine, May-June 2014 (part 1; part 2 in a future issue -- subscription required)

I hope this information has been fun and informative, and just the inspiration you need to get working with plaster and clay!

Happy fusing,
Dana

Learn more about Bullseye Glass Educational Videos!
Bullseye Kiln-glass Education Online

Monday, May 12, 2014

Slumping into Stainless Steel!

Quite often I hear someone advise another fuser than you can't slump into stainless steel. They always quote the rule of thumb, "slump into ceramic; drape over stainless steel". While I agree that it can be tricky slumping over ceramic (I've had to shatter a mold before to free the glass), slumping into stainless steel can be quite successful.

Patty Gray has designed a line of products to make a fuser's life easier, including a nice stainless steel bowl mold. It produces a lovely, balanced bowl every time that looks great with or without a stand.

This weekend I finished up a piece, shown above, that was three layers fused in one of Patty's dam molds and slumped into the bowl mold. The dam mold produces a nice edge that requires little coldworking before slumping. The piece was accented with Unique Glass Color's Artisan (bubble) paints.

You can find the dam mold at most on-line glass retailers, as well as Creative Paradise (round dam mold). You can also find all of Patty's molds at my favorite wholesaler, D&L Art Glass (stainless mold).

Happy fusing!

Dana